已完结小说排行榜,欢乐颂第二季,遮天辰东小说

數據記錄儀

手持儀表

監測系統

工業用變送器

可編程溫度變送器，4-20 mA輸出，用于Pt1000/3850ppm


	介紹資料
	濕度溫度計算器

Temperature probes and transducers for Pt1000/3850ppm sensor with 4-20mA output for two-wire connection are built in a durable watertight case. Output temperature range is user adjustable. Degrees Celsius and Fahrenheit are user selectable. Large dual line LCD is an advantage. Display is possible to switch off. Computerized design ensures maximum long term stability and fail indication.

APPLICATIONS - measuring and control of temperature at:

warehouses
glasshouses
manufacturers
museums, archives, galleries
air-conditioned rooms
weather stations

COMMON TECHNICAL PARAMETERS
Available temperature units:	degrees Celsius, Fahrenheit
Accuracy of temperature output of T0110 probe:	±0.4°C
Accuracy of temperature output of T4111 transducer:	±0.15°C plus 0.1% from adjusted output span (without temperature probe)
Temperature operating range:	-30 to +80°C
Temperature operating range of LCD display:	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Current output - two-wire connection:	4-20mA
Output temperature range:	user adjustable from the PC
Protection:	IP65 electronics
Power:	9-30Vdc
Warranty:	two years

Thermometer is available in the following types:

Thermometer Model

Measured value

Maximum range of measured temperature

Output

Note

T0110

temperature

-30 to +80°C

outdoor and indoor

Mechanical drawing

Interconnection terminals

Manual in pdf

T4111

temperature

-200 to +600°C

transducer for Pt1000/3850ppm probes, output range adjustable by the user

Mechanical drawing

Interconnection terminals

Manual in pdf

Outputs are adjusted to maximum range from the manufacturer. Output range is user adjustable from the PC by means of the optional cable SP003 - see below. Free configuration program for transmitter adjustment is ready to download anytime. If different adjustment of temperature output range is required, please specify required output range.

Ordering example: Thermometer T4111, output -100 to +30°C

barometer wiring

Typical application wiring

Calculation of minimum power voltage Uss for proper operation:
Uss min> Uo min + Imax * Rz,
where: Uo min= 9 V
Imax... approximately 20 mA
Rz... sensing resistor (shunt)

Included accessory of thermometer:

Traceable calibration certificate from the manufacturer, instruction manual. Calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Example of calibration certificate.

Free program TSensor for configuring of the transmitter is ready to download.

OPTIONAL ACCESSORY OF THERMOMETER
	SP003	cable for thermometer adjustment via USB port
	TxxxxL	Transmitter version with watertight male connector IP67 Lumberg RSFM4 instead of cable gland for easy connection/disconnection of the output. Specify please your order with letter L behind model code (e.g. TxxxxL)
	K1427	Female connector ELKA 4012PG7 for TxxxxL transmitters with male connector Lumberg for easy connection/disconnection of the output. Cable is easily connected to screw terminals of the connector. IP67 protection.
		Transmitter version with blind lid without LCD. Specify please the requirement in your order.
	probes	temperature probes with Pt1000 sensor without connector - probe marking is followed by symbol /0. Recommended is multi-purpose watertight probe Pt1000TG8/0 available with cable lengths 1, 2, 5, 10m
	MD036	self adhesive Dual Lock for easy installation
	SP005	Tool for easy wire connection to terminals